Samsung WA48J7700A Serie Manuel D'utilisation page 49

Self Clean
Self Clean Auto Indicator function
WA7700J-03520D-07-EN.indd 49
Self Clean is a self-cleaning cycle that
removes mold that may occur inside the
washer.
1. Press Power.
2. Select Self Clean.
Once Self Clean is selected, the only
function that can be set is Delay End.
3. Press Start/Pause.
Self Clean begins.
CAUTION
• Using Self Clean, you can clean the drum
without using a cleansing agent.
• Never use Self Clean when laundry is
in the washer. This may cause damage
to the laundry or a problem with the
washer.
• If the Self Clean indicator is lit after
a wash, it indicates that tub (drum)
cleaning is required. In this case, remove
the laundry from the washer, turn
the power on, and clean the drum by
running Self Clean.
• If you do not run Self Clean, the
Clean indicator turns off. However, the
Self Clean indicator will light again
after two washes. Not running Self Clean
at this point will not cause a problem
with the washer.
• Although the Self Clean indicator is lit
once a month or so, the frequency may
differ depending on the number of times
the washer is used.
Self
English 49
2015/12/22 15:39:52