Samsung WA48J7700A Serie Manuel D'utilisation page 37

Washing clothes using the cycle selector
Your new washer makes washing clothes
easy, using Samsung's "Fuzzy Control"
automatic control system. When you select
a wash program, the machine will set the
correct temperature, washing time, and
washing speed.
1. Press Power.
2. Open the lid.
3. Load the articles of clothing one at a
time loosely into the drum, without
overfilling it.
4. Add liquid (or powder) detergent,
softener, and/or bleach (if necessary) to
the appropriate compartments. See the
"Detergent use" section on page 41.
5. Close the lid.
6. Use the Cycle Selector to select the
appropriate cycle according to the type
of material: NORMAL, HEAVY DUTY,
COLORS/DARKS (WA48J7700A*), SUPER
SPEED (WA48J7770A*), BEDDING,
DELICATES, WATERPROOF, PERM PRESS,
ACTIVE WEAR, QUICK WASH, SPIN, and
RINSE+SPIN. The relevant indicators will
illuminate on the control panel.
7. At this time, you can control the wash
temperature, the number of rinse cycles,
the spinning speed, and the delay time
by pressing the appropriate option
button.
8. Press Start/Pause and the wash will
begin. The process indicator will light up
and the remaining time for the cycle will
appear in the display.
Pause Option
To remove or add laundry items, follow
these steps:
WA7700J-03520D-07-EN.indd 37
1. Press Start/Pause to unlock the lid.
NOTE
The lid cannot be opened when the water is
too HOT.
2. Remove or add laundry items.
3. Close the lid, and then press Start/Pause
to restart the wash.
NOTE
If you have Child Lock on, you must
deactivate it first. See page 33.
English 37
2015/12/22 15:39:49