ARDES AR455B Mode D'emploi page 8

Instructions for use
SUPPORT BASE ASSEMBLY INSTRUCTIONS.
Before performing any assembly operation, make certain that the appliance is
switched off and disconnected from the power outlet. Pass the power cord through
the central hole so that it slides through the special space and is fixed in the cord
slot underneath the base.
Screw on the screws with plastic heads to fix the heating body to the base,
tightening them correctly.
USER INSTRUCTIONS.
To turn on the appliance, insert the plug into the power outlet and press the orange
"ON" push button.
When the appliance turns on, only one lamp will come on.
If you wish to increase the heating power of the appliance, just press the
independent "400W" and "800W" buttons to turn on the other two halogen lamps.
To activate the oscillating function, press the "TURN" button. The size of
the oscillation angle is fixed.
You can change the heating direction by manually rotating the body of the appliance
while holding the support base stationary.
The appliance is equipped with an automatic turn-off system in case it falls over
accidentally.
Before connecting or disconnecting the appliance, make certain that all the
switches are in the off position.
Before replacing the appliance in its packaging, check that it has cooled sufficiently.
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well before
cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from entering into
the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
8
Maintenance
GB
GB