Publicité
Les langues disponibles
Les langues disponibles
Water pressure
If you want to check how much water flows into the ice tray, follow these steps.
A
CAUTION
• Do not repeatedly press the button on the bottom of the ice maker when the tray is
filled with water. Water may overflow or ice may be jammed.
• Make sure the icemaker bucket is inserted properly. Otherwise, the ice maker will not
operate.
• If there is a power failure, remove the ice tray. Water may flow.
Untitled-8 57
1. Remove the ice bucket.
2. Press the button (A) on the bottom of
the ice maker. Normally, the ice tray
fills with water in a few minutes.
3. If the water level is lower than
expected, check the water pressure of
the water supply line from the water
source. This is not a system failure.
English 57
2021-05-27
3:16:07
Publicité
