Publicité
Les langues disponibles
Les langues disponibles
Installation
Water filter replacement (applicable models only)
CAUTION
• Do not use third-party water filters. Use only Samsung-provided or -approved filters.
• Unapproved filters may leak and damage the refrigerator, causing electric shock.
Samsung holds no responsibility for any damage that may occur from use of third
party water filters.
• The filter indicator turns red as a reminder that lets you know it is time to replace the
water filter.
36
English
Untitled-8 36
CAUTION
Do not mount the water filter on any part
of the refrigerator. This may damage the
refrigerator.
1. Shut off the main water supply.
2. Connect the water supply line to the
inlet side of the filter to the end.
3. Connect the dispenser line to the outlet
side of the filter.
4. Check if there is any leak. If not, fix the
lines with the clips.
5. Put the water filter into place and fix it
with the clips.
6. Press and hold Filter Reset for
3 seconds to reset the filter lifecycle.
7. When replacing is complete, flush 10
litres of water (or dispense the water
for 6 - 7 minutes) to remove impurities
from the water line.
2021-05-27
3:16:02
Publicité
