Publicité
Les langues disponibles
Les langues disponibles
Connecting to the water supply line
1. First, shut off the main water supply line.
2. Locate the nearest cold, drinking water line.
3. Follow the Water Line Installation Instructions in
the installation kit.
CAUTION
The water line must be connected to the
cold water pipe.
If it is connected to the hot water pipe, it
may cause the purifier to malfunction.
Close Main
Water pipe
Close Main
Water pipe
4. After connecting the water supply to the water
filter, turn your main water supply back on and
Dispense about 3 L to clear and prime the
water filter.
Connecting the water line to the
refrigerator
1. Remove the cap from water line on the unit and
insert compression nut to the water line on the
unit after disassembling from provided water
line.
2. Connect both water line from the unit and water
line in the kit.
3. Tighten the compression nut onto the
compression fitting.
Be careful no gap between two items.
4. Turn water on and check for any leakage.
DA68-02976G-07.indb 25
If you have to repair or disassemble the water line,
cut off 6.5 mm of the plastic tubing to make sure
you get a snug, leak-free connection.
No gap
CAUTION
• Samsung Warranty does not cover WATER
• It'll be done at customer's charge unless the
• Please contact Plumber or Authorized Installer
• If Water leakage occurs due to improper
English - 25
Remove cap
Loosen a
Water Line from unit
No gap
Water Line from Kit
Only connect the water line to a drinkable
water source.
Before being used, the leakage in these
places should be examined.
LINE INSTALLATION.
retail price includes installation cost.
for the installation if needed.
installation, Please contact installer.
2017. 7. 7.
10:14
Publicité
