Publicité
Les langues disponibles
Les langues disponibles
4. Hook up the electrical wire connector.
5. Insert 2 front parts of the cover first, push down
on both side parts of the cover, and then secure
the cover in place using a Phillips screwdriver.
• The doors can be assembled in the
reverse order of their disassembly.
CAUTION
• The display may not function properly if you
neglect to connect the electrical wires while
assembling the door.
DISASSEMBLE THE
REFRIGERATOR DOORS
(SHOW CASE OF COLD
COMPARTMENT)
1. Disconnect the power cord, and remove 2
cover screws using a Phillips screwdriver
Then open the refrigerator door and pull
the hooks on the sides to loosen the cover
( 2 ).
Lift up the cover and towards you to
detach it ( 3 ).
- Detach the hinge cover with the door open and
then close the door once the hinge cover has
been detached.
DA68-02976G-07.indb 19
( 1 )
( 2 )
2. Disassemble the housing connector.
3. Disassemble the three fastening screws on the
top hinge of the show case.
4. Disassemble the show
case.
English - 19
( 3 )
2017. 7. 7.
10:14
Publicité
