NGM WeMove Legend 2 Guide Rapide page 25

All manuals and user guides at all-guides.com
Charging the battery
Please charge the battery completely before starting to use the device. Use the provided
USB cable, connecting one end to the provided wall socket adaptor (placed into a socket)
and the other end to the USB connector placed on the top side of the phone after opening
its protective slide. The phone can also be charged by connecting it to a PC USB port but in
that case it will charge more slowly. While the battery is charging, an animation on screen
will show the charging progress if the phone is on. Once charge is completed, the icon will
be filled and the phone can be disconnected from the grid. Close the protective micro-USB
slide.
Warning: Do not connect the phone to a booting-up or running down PC to avoid voltage
jumps. In order to preserve the correct functioning of the device and in order not to
compromise warranty, the sole use of original NGM battery chargers and accessories are
recommended. Please charge the battery indoors, in a dry and favorable environment. It's
normal for the battery to get slightly warm during the charging process. The battery will
reach its full capacity when cycled several times.
Turn on, turn off and standby
Press and hold the on/off key to turn on the phone. Press and hold the same key and
confirm your intention to turn off the phone. A quick pressure of the on/off key sets the
phone on standby-mode (screen off) or allows you to go back to the standby screen (see
below).
ENGLISH 25