Braun SensorControl BP 2550 Mode D'emploi page 11

Problem Reason
e.g. Error message lower than
64:
System error
Measurement or Right measurement
inflation does not position was not reached.
start instantly.
Readings from Blood pressure is a
repeated mea- fluctuating value.
surements differ For healthy adults,
considerably. deviations of 10 to
20 mmHg are possible.
Cuff is not properly fitted.
Readings were not con-
sistently taken at heart
level.
Talking, coughing,
laughing, moving etc.
when measuring will
influence the reading.
Prior to a mea- Position sensor is de-
surement, the activated.
position sensor
icon on the display
does not work.
All manuals and user guides at all-guides.com
Solution
Have the product checked at a
Braun Service Centre.
Repeat measurement as shown
and described under «Measuring»
or deactivate the position sensor.
none
Ensure that the appliance is fitted
as follows:
• on top of the slim side of the
forearm
• with the display on top
• with the battery compartment
facing the user's body
• approx. 2 cm away from the
thumb root
For each measurement, proceed
exactly as shown and described
under «Measuring».
While measuring, relax, keep still,
do not move, or speak.
Refer to the chapter «Settings»
to activate the position sensor.
11