Changing The Illumination Lamp; Adjusting The Legs - Beko RDNE390M21SX Manuel D'utilisation

The condenser of your appliance
is located on the back as shown
below. In order to achieve better
energy efficiency with lower energy
consumption, please pull the
condenser towards yourself as
illustrated in picture below. The
condenser position will be fixed firmly
by means of locking mechanisim of
the top holders on each side.
* OPTIONAL
v
Changing the illumination
lamp
To change the Bulb/LED used for
illumination of your refrigerator, call
your AuthorisedService.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose of
this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer
in a safe and comfortable way.The
lamps used in this appliance have to
withstand extreme physical conditions
such as temperatures below -20 °C.
(only chest and upright freezer)

Adjusting the legs

If your refrigerator is unbalanced;
You can balance your refrigerator
by turning its front legs as illustrated
in the figure. The corner where the
leg exists is lowered when you turn
in the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone to
slightly lift the refrigerator will facilitate
this process.
11
EN