Publicité
8/16/22, 9:38 AM
10. Retirez lentement et délicatement la cuve de l'imprimante.
11. Sélectionnez
Con rm Removal
Material Vat Installation
1. From the UI, select
1.png
2. Perform the following steps before
a. Insert displacer into printer.
i. Add the two weights into the displacer.
b. Slowly and carefully push the vat into the printer.
i. Secure the (2) vat locking arms on the left and right side of vat.
ii. Reconnect the vat power supply and data cable.
iii. Turn the power switch to the On (l) position.
c. Install and secure the recoater with the (2) locking levers.
i. Install the recoater cover.
3. Select
All Steps
3a.png
4. Select
Done
when the Vat Insertion Complete prompt appears.
4.png
fr.infocenter.3dsystems.com/sla-750-series/print/book/export/html/526
(Con rmer le retrait) dans l'interface utilisateur.
Insert
Vat.
selecting All Steps
Complete.
Guide de l'utilisateur
Complete.
97/114
Publicité
