Preparation For Installation; Accessories Supplied With The Pump; Assembly - Agilent Technologies MS120 Mode D'emploi

Preparation for Installation

Accessories supplied with the pump

The pump is delivered with the following accessories required for
commissioning and maintenance:






Assembly

Remove inlet and exhaust plastic caps.
The pump is supplied ready for use, there are not other parts to be
assembled.
Pump is without oil, see paragraph "Oil change" for the instructions
on how to fill in the oil.
MS120 Single Stage Rotary Vane Pumps User Manual/87-900-150-01 (C.00)
Oil Tank
Nozzle cap load oil
Oil drain pipe
I/O Mating Connector
Spare fuses.
Instructions for Use

Preparation for Installation

4
140/193