Télécharger Imprimer la page

Eureka 74 Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

Identify Parts
1
1. Dust Cup
2. Motor Filter
3. Dust Cup Latch
4. On/Off Switch
5. Handle Section
6. Battery Pack Door
7. Battery Pack
8. Wall Bracket
9. Charger
Attach Charger Plug to Wall Bracket
CAUTION: Use only charger model 514 for 120
volt; model AD0412-SV1 for 230 volt.
1. Align charger plug with hole on inside of wall bracket.
2. Push the plug to secure it into the hole. Plug extends
to outside and plugs into handle section when it is on
the wall bracket.
Mount Wall Bracket
Cleaner hangs in bracket with the nozzle end down. Mount on a wall where there are no
dangerous objects hidden beneath the wall surface like electrical wires, pipes, etc.
1 . Hold bracket against wall to mark
location for screws.
2. Use a 1/4 inch drill for drilling holes
for the plastic anchors.
3. Insert the anchors and screw the
bracket onto the wall.
All manuals and user guides at all-guides.com
3
2
4
5
6
8
9
7
5

Publicité

loading