Publicité
ENGLISH
RECOMMENDATIONS
•
Please read the components list BEFORE assembly, make sure that no parts are damaged or missing.
•
Read through the complete assembly instructions again.
•
Assemble all parts according to the instructions in this manual and do not skip any step.
•
Treat the wall panels with extreme care before and during assembly. Carefully place them on the ground.
•
Avoid stepping on or placing any objects on it.
•
At least two people are required to assemble the composite sheds.
•
It is mandatory to build a level and crack-free concrete base as a foundation.
•
Leave enough space at the installation site outside of the composite shed so that you can access the composite shed
from the outside during assembly.
•
Remove all parts from the packaging and spread them out on a clean work surface by Area I/II and III.
•
Due to the high proportion of composite material, the surface may have different shades and may change color over
time. But it doesn't mean that it requires special treatment, nor does it affect the life of the composite sheds.
•
Never use aggressive cleaning agents as they can stain or damage the composite shed. It is recommended to use only
water and a mild soap.
CARE, MAINTENANCE AND SAFETY INSTRUCTIONS
Q The composite shed is generally used for storing objects. The composite shed is not especially designed for residential
purposes.
Q Do not set up on a windy or cold day.
Q Check the composite shed regularly for stability and make sure that the location is level.
Q Be careful when handling parts with steel edges.
Q For the construction and handling of the composite shed, please only use tools that are listed in the assembly
instructions.
Q Always wear work gloves, safety glasses and any other kind of clothing with long sleeves when assembling the
composite shed or performing any kind of maintenance work.
Q Avoid using lawnmowers and mechanical scythe in the immediate vicinity of the composite shed.
Q Always wear safety goggles and always follow the manufacturer's instructions when using power tools.
Q Clean the composite shed with a garden hose and a mild detergent. You can use a soft-bristled brush but do not use
any abrasive or degreasing agents, as well as cleaning agents containing oil or acetone, as these can stain or damage
the product.
Q Do not damage, gouge, scrape or puncture the surface of the composite shed, using metal shovels or sharp-edge tools
to remove snow and ice on the entire surface of the garden shed or in any other way. Instead, use a plastic shovel and
recommended calcium chloride or germicidal salt to melt snow and ice.
Q Do not paint, stain or apply other coating materials or any other chemical substances, including detergents or
pesticides to the composite shed.
Q Immediately clean the stains left by oil based substances such as vegetable oil.
Q Do not store any hot objects in the composite shed, such as recently used grills or blowtorches, or any volatile
chemicals.
Q Do not lean heavy objects against the walls of the composite shed, as this could distort the entire composite shed.
Q Keep the roof free of snow and accumulated foliage. Large amounts of snow can damage the composite shed and
make it dangerous for entering.
Q Make sure there is sufficient ventilation at the composite shed. This way you avoid moisture.
Q The wind direction is an important factor that must be taken into account when setting up the composite shed. Try
to avoid placing it anywhere where there could be excessive wind loads, especially high wind pressure on the doors.
Always keep the doors closed and locked when the composite shed is not in use to avoid any kind of wind damage.
Q Please contact your local authorities to inquire if a permit is required to build the composite shed.
fiberwood.ca
2
Publicité
