Technical Details; Customer Support - Zipper ZI-KGS210 Mode D'emploi

EN
OPERATION MANUAL
Dear Customer!
This manual contains important information and
advice for the correct and safe use and
maintenance of the ZIPPER mitre saw. The
manual is part of the machine and may not be
stored separately. Read it profoundly before
first use of the machine and keep it for later
reference. When the machine is handed to other
persons always put the manual to the machine.
Please follow the security instructions!
Due to continuous development of our products
illustrations, pictures might differ slightly.
Attention!
Technical changes reserved!
Copyright
© 2010
This manual is protected by copyright law
rights reserved. Especially the reprinting as well
as the translation and depiction of pictures will
be prosecuted by law. Court of jurisdiction is
WELS, Austria.

Customer Support

Z.I.P.P.E.R MASCHINEN GmbH
Gewerbepark 8
A-4707 Schlüßlberg
Tel 0043 (0) 7248 61116 - 700
Fax 0043 (0) 7248 61116
info@zipper-maschinen.at
all
720
7 TECHNICS
7.1

Technical Details

Voltage
Engine power
Engine speed
Protection class
Protection type
Saw blade diameter
Diameter of the saw
blade bore
Maximum thickness of
the saw blade
Maximum cutting
powers:
Cutting power 0°/ 90°:
Cutting power 45°/ 90°:
Cutting power 0° / 45°:
Cutting power 45° / 45°:
Laser details
Wave length of the laser
weight (net/gross):
Noise emission: weighted
Lp
Noise emission: weighted
Lw
7.2 Components (Fig. A)
1. Lock handle
mitre
2. Lock knob work
piece fence
3. Double
designed pulling
equipment
4. Deepness
limitation
5. Exhaust socket
6. Saw aggregate
7. Transport
handle
EN
230V/50 Hz
1.5 kW
5700 rpm
II
IP20
210 mm
30 mm
2.6 mm
205 x 65 mm
145 x 65 mm
205 x 35 mm
145 x 35 mm
Class II, EN
60825
650 nm
16 / 18 kg
86.0 dB(A)
99.0 dB(A)
Locks the saw aggregate at
the desired angle.
For fixing the fence.
For moving the saw
aggregate forwards and
backwards.
For deepness limitation
(groove cuts)
Mount the black dust bag
onto it.
Engine, saw blade assembly,
saw arm, operation handle
Lock the aggregate at the
lowest position, lock the
pulling equipment, now the
machine s ready for
transport.