Onkyo CR-265 Manuel D'instructions page 24

Wireless Playback via Bluetooth—Continued
3 Use the [q]/[w] buttons to select "On," then
press the [ENTER] button.
The Auto Change function is now enabled.
To disable the Auto Change function, select
"Off," then press the [ENTER] button.
Note:
• The factory default for the Auto Change function is
"On." If you do not want the CD receiver to
automatically change the input source to Bluetooth
each time you turn on the power to a Bluetooth-
enabled device, disable the Auto Change function.
Resetting Bluetooth
If pairing fails, or if a Bluetooth connection cannot be
established, or if you have any other problems related to
Bluetooth, try to reset Bluetooth on the CD receiver.
If you reset Bluetooth on the unit, all pairing
information will be deleted and you will need to pair the
devices again.
1 Turn on the power to the CD receiver, then
press the [ ] button to change the input
source to "Bluetooth."
2 Press the [MENU] button, use the [q]/[w]
button to select "Reset BT?," then press
the [ENTER] button.
3
Press the [ENTER] button again.
Bluetooth is reset and the "Complete" message
appears.
Note:
• After resetting Bluetooth, delete the device
registration (pairing information) on the Bluetooth-
enabled device, and perform the pairing process for
the CD receiver and the device again.
24
En-
Using the Bluetooth Standby
Function
If the Bluetooth Standby function is enabled,
establishing a Bluetooth connection from your
Bluetooth-enabled device will automatically turn on the
power to the CD receiver and Bluetooth will be selected
as the input source.
1 Turn on the power to the CD receiver, then
press the [ ] button to change the input
source to "Bluetooth."
2 Press the [MENU] button, use the [q]/[w]
buttons to select "BT Standby >", then
press the [ENTER] button.
3
Use the [q]/[w] buttons to select "On",
then press the [ENTER] button.
The Bluetooth Standby function is now enabled.
To disable the Bluetooth Standby function, select
"Off", then press the [ENTER] button.
4
Place the CD receiver in standby mode.
Now the CD receiver is in Bluetooth Standby
mode.
Note:
• Power consumption during Bluetooth Standby mode
increases compared to normal standby mode.
• Some Bluetooth-enabled devices establish a
Bluetooth connection once the power to these devices
is turned on. These devices will automatically turn on
the power to the CD receiver if the Bluetooth Standby
function on the CD receiver is enabled.