StreamLight TLR-1 Série Instructions D'utilisation page 5

Rail Keys
Four polymer rail keys (included) allow the TLR to be attached to a variety of firearms: GL - Glock or
"universal" rails, SW - TSW & 99, Beretta - 90two, Sig – P320, 1913 - Mil Std-1913 (Picatinny).
Each rail key is stamped for easy identification and
the keys share a common key screw and hex nut.
Each key has a hex nut cavity in the base.
6- Lock
(Latch will stop against top of door)
5- Swing Door Closed
(Apply Force)
Hex Nut Cavity
1. Select the appropriate key and insert a hex
nut into the cavity in the base of the key.
Note: Adjust the hex nut so no portion
protrudes from the key.
2. Hold the rail key (hex nut side up) and the
TLR (key pocket side down) and align the two.
3. Insert the key into the TLR key pocket and
use a 7/64" hex wrench to secure it with the
key screw.
NOTE: A key MUST be used or the TLR will slide
off the front of the rail under recoil.