Honeywell Home TH6320ZW2007 Guide D'utilisation page 14

Key features
System status
information
Cool On, Heat On
Auxiliary Heat On,
Recovery, or Auto
Changeover On.
Schedule information
Following time or
occupancy based
temperature control.
Desired temperature
Displays the desired
temperature setting.
Indoor temperature/
% indoor relative
humidity
Touch to display either
indoor temperature or %
indoor relative humidity.
Mode
Select system mode:
Auto (if enabled)/Heat/
Cool/Off/EM Heat
(Emergency Heat if
installed and configured).
The screen will wake up by pressing the center area of the displayed temperature.
If powered by 24 VAC, the screen stays lit for 45 seconds after you complete
changes.
If powered by battery only, the screen stays lit for 8 seconds.
Brightness of an inactive backlight can be adjusted in the thermostat MENU only
if the thermostat is powered by 24 VAC.
Installer setup – advanced menu
To access the advanced menu, press and hold the Menu button
for 5 seconds. Touch
advanced menu.
Advanced menu options
Device Setup
This is used to access the device ISU
setting.
Screen Lock
The thermostat touch screen can be
locked fully or partially.
System Test
Test the heating and cooling system.
Time, ISU #, or
Alert #
Heat On
Following Schedule
Mode
Heat
Wake Away Home Sleep
Mode Menu
Menu
Touch to display user
options.
Note: Long press
of Menu button
for 5 seconds to
access Advanced
Menu options.
or to go through the options in the
Z-Wave connection
status
Messaging
AM Recovery
Auto Chg. On
Fan
Schedule period
Auto
Fan
Fan
Reset
Access all reset
options on the
thermostat. This
is the only place
to access factory
reset.
Range Stop (Temperature)
Set the Minimum Cool and Maximum
Heat temperature set points.
14
Shows Z-Wave
connection status.
Shows device setup
options, menu options,
reminders, schedule
overrides.
Shows schedule period:
Wake/Away/Home/
Sleep. (varies on whether
included in/excluded
from Z-Wave network
and program scheduled
enabled).
Select Fan mode Auto/
On/Circulate.
Following Schedule
Mode
Heat
Away Home Sleep
Mode Menu
Press and hold for
5 seconds.
AM
Fan
Auto
Fan