Troubleshooting - FUAVE ACB07K01 Mode D'emploi

TROUBLESHOOTING

Troubles Possible Causes
The unit •
does not
start when
pressing •
power
button.
•
The unit •
doesn't cool
enough. •
•
•
•
Auto Power- •
Off in heating
mode.
Noisy. •
•
Water full indicator lamp
blinks and water tank is
full.
Room temperature is
higher than the setting
temperature. (Electric
heating mode)
Room temperature is
lower that the setting
temperature. (Cooling
mode)
The doors or windows
are not closed.
There are heat sources
inside the room.
Hot air exhaust hose
is not connected or
blocked.
Temperature setting is
too high.
Air inlet is blocked.
Heating protection,
when the temperature
at the air outlet exceeds
70°C, the unit will power
off automatically.
The ground is not level
or not flat enough.
The sound comes
from the flowing of the
refrigerant inside the air
conditioner.
Suggested Remedies
• Drain the water out of
the water tank.
• Adjust the temperature.
• Make sure all the
windows and doors are
closed.
• Remove the heat
sources if possible.
• Connect or clean the
hot air exhaust hose.
• Reset the temperature.
• Clean the air inlet.
• Allow room temperature
to cool before re-
starting the unit.
• Place unit on a flat, level
ground if possible.
2 5