JVC KD-SX925R Manuel D'instructions page 6

RADIO BASIC OPERATIONS
Listening to the radio
1
FM/AM
F1 F2
(FM1) (FM2)
2
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching
1 Press FM/AM repeatedly to select the band (FM or AM).
2 Press and hold
Now you can manually change the frequency while "MANU" is flashing.
¢ or
3 Press
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9 kHz intervals for AM–MW/LW) until you release the button.
6
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
F3
AM
(FM3)
Audio (see page 29) or
volume level indicator
To search stations
of higher
frequencies
To search stations
of lower frequencies
¢ or 4 until "MANU (Manual)" starts flashing on the display.
4 repeatedly until the frequency you want is reached.
1
Selected band (or clock time:
see page 29) appears.
Start searching a station.
When a station is received, searching stops.
2