USING THE HEATER:
INDICATOR LIGHTS:
Plug into the mains socket on the wall.
1.
2. Turn on the power switch (6) placed on the back of the appliance.
3.
The display shows the temperature of the room with the indicator light
4. Press the On / Off button (7)
5. The indicator light
6. For selecting the heating powers: Power 1 / Power 2:
Press the I / II button (9)
Indicates power heating I = 1200W
Indicates power heating II = 2000W
The heating will run continuously in this mode.
7. You can set the desired temperature by pressing the + and - buttons (12
and 13).
with a deviation of less than 4 ℃ of temperature difference, the heating is
-When the desired temperature is higher than the ambient temperature,
-When the desired temperature is at least 4 ℃ higher than the ambient
automatically set to the heating power I.
temperature, the heating is automatically set to the heating power II.
Caution: If you press the heating power setting button again, the heating
will operate in continuous mode without taking into account the desired
temperature.
8. Press the MINUT (10) button to select the Auto Off timer.
-Press the "TIME" button repeatedly to set the automatic shut-off time
between 1-12 hours.
- Each press of the "MINUT" key increases the duration by one hour.
9. Press the OSCIL button (11) to select the oscillation.
10. To turn off the unit, press the On / Off button (7)
The appliance will continue to operate automatically in cold ventilation
mode (without heating power) for 30 seconds to cool the appliance before
stopping completely.
to turn on the heater.
is turned on and the unit works on fan mode.
:
GB-7