Christopeit Sport LB 1 Notice De Montage Et D'utilisation page 17

Step 4:
Checks and How to start
1. Check the correct installation and function of all screwed and
plug connections.
2. When everything is in order, connect the power supply plug (57)
with power cable (76) and wall power (230~Volts/50Hz) and
switch on the main switch (58) below the front frame.
3. Put the safety key (2) into the computer (1) and the computer will
give you a small sound and go into the normal manual mode.
Put the safety clip (2) at you exercising cloth and stand on the
side rails (74). Press Start-Button and after a Count Down of 5
sec. the treadmill will start moving. Start walking onto the walk
surface (71) when speed is low and follow the speed. Familiari-
ze yourself with the machine at a low speed settings.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later. benötigt werden.
How to move/store your treadmill:
1. Pull the locking knop (29) and place your hand on the end cap
of the system frame then folding the system frame up and lock it
with locking knob.
2. Place your hands on top of the handrails, than lean the machine
toward your body sideways, this way you can move it easily.
17