Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3
BOOSTER MODE
installation instructions
50
1-866-954-9786
Radian 3 RXT
Rainier 2 AXT
BOOSTER MODE INSTALLATIONS:
18–54 kg (40–120 lb)
WARNING!
Use ONLY the vehicle lap/shoulder belt
system when restraining the child in this booster
seat.
DO NOT
USE A LAP BELT ONLY!
WARNING:
Make sure vehicle seat belt has properly
retracted before use.
NOTE: If 5-Point harness is installed, please review the
harness removal section. The 5-point harness MUST
be removed to use this seat in booster mode.
1. Place child in seat with their back flat against
the back of booster seat.
2. Slide vehicle's lap/shoulder belt over booster
seat and between inside of car seat shell and
the belt guide in the headrest.
3. Buckle the vehicle lap/shoulder seat belt.
Be sure the lap/shoulder belt lies across your
child's shoulders, between the neck and edge
of the shoulder. Be sure the lap portion of the
vehicle seat belt goes under the side nubs and
the belt lies low across your child's hips.
diono.com
51
Publicité
Chapitres
Table des Matières
