Sage the Smart Grinder Pro SCG820 Guide Rapide page 9

OPERATING YOUR NEW APPLIANCE
Program Function
Once you have set your required dose,
you can program this time into the number
of shot(s) currently displayed on the LCD.
Press and hold the PROGRAM button,
grinder will beep twice to confirm. Only
the shot displayed will be programmed,
all other shots will remain unchanged.
Manual Grinding
Grinding manually allows you to have complete
control over how much coffee is dispensed.
• Press and hold either the START / PAUSE /
CANCEL button or push the handle of your
portafilter to activate the PORTAFILTER
SWITCH for as long as you require.
• Release START / PAUSE / CANCEL button or
PORTAFILTER SWITCH and grinding will stop.
OR
START PAUSE
PRESS, HOLD & RELEASE
PUSH
PORTAFILTER SWITCH
ADJUSTING YOUR GRIND AMOUNT
Increasing the Grind Amount
To increase the grind amount selected, turn the
GRIND AMOUNT dial to the right.
GRIND AMOUNT SHOTS CUPS
PROGRAM
Decreasing the Grind Amount
To decrease grind amount selected, turn the
Grind Amount Dial to the left.
NOTE
To RESET the grind amount/time to the default
settings, press and hold the SHOTS / CUPS
button until a long beep sounds.
EN
START PAUSE
CANCEL
9