Télécharger Imprimer la page

Kuppersbusch EEB6860.0 Mode D'emploi page 48

Publicité

Les langues disponibles

Les langues disponibles

... The glass in the door is broken.
Switch off the oven and ask the after-sales service to change the door.
... The door gasket is damaged.
Replace the door gasket. See 'Change the door gasket'.
Do not use the oven if the door gasket is damaged.
... the oven light is not working
The oven can still be used. Change the halogen lamp as soon as possible
– make sure the oven is off and cold. See 'Changing the oven light'.
...there is a strong smell.
Regenerate the ökotherm® catalyst. See 'Regeneration of the ökotherm®
catalyst'.
there is a strong smell of vinegar while cooking.
You will notice a vinegary smell when preparing dishes containing alcohol
or yeast on hot air settings. If the smell is unpleasant, use a setting that
does not include the fan, such as top/bottom heat.
... there are fruit juice or egg white stains on enamelled parts.
This is a minor change in the enamel that cannot be turned to its original
state.
Maintenance
Changing the oven light
Caution The halogen lamps become very hot when they are on for a
long period of time. Only change the lamps when they are cold.
Caution, danger of electric shock Before opening the cover of the
oven lamp, you must disconnect the appliance from the electrical
supply. Disconnect or unscrew the fuse, or unplug from the power
source.
Only replace the halogen lamps with the same type. New halogen
lamps can be purchased from the Küppersbusch After-Sales Service.
Do not touch the halogen lamps with your bare hands. Fingerprints
will burn onto the surface of the glass and reduce both the luminosity
and its useful life.
If the glass cover does not immediately loosen (for example, because
of the dirt after prolonged use), levering it out may cause
the glass to crack. If this happens, hold a cloth against the cover so as
to catch the glass fragments.
48
Changing the halogen lamp
– Remove the shelf runners.
– Remove the glass cover carefully by
levering it with a screwdriver.
– Remove the halogen lamp from the
interior.
– Insert the new halogen lamp using a cloth or paper towel.
– Replace the glass cover by pressing until it locks in.
– Reassemble the shelf runners.
Changing the door gasket
Do not use the oven without a gasket or with a damaged one.
If the gasket is damaged or can no longer be cleaned, it must be changed.
A new gasket can be purchased from the KÜPPERSBUSCH After-Sales
Service.
Removing the gasket
– To remove the gasket you must
carefully pull it outwards at each of the
corners.
Positioning the new gasket
– Attach one corner after the other to the front of the oven.
Be careful to not bend the clasps.
EEB 6860.0

Publicité

loading