Publicité
Les langues disponibles
Les langues disponibles
EN
9.5
INSTALL THE FILTER
9
1. Press the latch on the both sides of the top cover
assembly then lift it up.
2. Align the filter with the filter cage.
3. Slide the filter on the filter cage.
4. Turn the filter cap clockwise.
5. Tighten the filter cap.
9.6
REMOVE THE FILTER
1. Press the latch on the both sides of the top cover
assembly then lift it up.
2. Turn the top cover assembly upside down.
3. Turn the filter cap counterclockwise.
4. Slide the filter off.
10
OPERATION
Do not handle switch, or machine with wet hands. Do not
expose to rain or allow liquid to enter the motor
compartment.
WARNING
English
10.1
START THE MACHINE
9
1. Connect to the power source.
2. Push the on/off switch to turn the machine on.
Leave a gap at the tip of the nozzle opening to allow air
inflow when you vacuum large quanties of liquids.
When the collection tank reaches the maximum capacity,
the suction action will stop. When this happens, turn off the
machine, disconnect from power supply and turn the drain
cap to drain the liquid.
10.2
STOP THE MACHINE
1. Push the on / off switch to turn the machine off.
10.3
BLOWING FEATURE
8
NOTE
NOTE
Publicité
