KPS TP5000HY Manuel D'utilisation page 3

All manuals and user guides at all-guides.com
TP5000HY
Voltage / Continuity / Single Pole Mode
Voltage Measurement
1000
V
AC
DC
690
400
230
L 120
R 50
RX
24
12
AC
V
V
Phase Rotation Test
- Clockwise Phase Sequence
L1-L2-L3(Right)
Phase Rotation Test works only on 3 phase 4 wire system.
The result is unreliable on other systems.
It is necessary to check the result by test with reverse sequence.
EN
AC
12 -
+
+DC
12
+
-DC
-
12
LED indicates measured
voltage is high than ELV limit
(50VAC and/or 120VDC).
Warning
• When batteries are not
fitted or are exhausted, the
tester still work when
measuring> 45VAC and/or
>35VDC.
1000
AC
• Timing Rating (tr):
DC
690
400
30 seconds, Recovery
230
Time (rt): 240seconds,
L 120
R 50 RX
when measuring >300V,
24
-
+ 12
recovery time is necessary.
• L/R LED may light up when
DC
V
measuring AC voltage.
• Due to the high internal
resistance, capacitive and
inductive Voltage (ghost
voltage) may be indicated.
- Counterclockwise Phase
Sequence L1-L3-L2(Left)