Changing The Illumination Lamp; Connecting The Water Hose To The Refrigerator; Connecting The Water Line To The Water Supply - Blomberg BRFB1052FFBIN Manuel D'utilisation

Masquer les pouces Voir aussi pour BRFB1052FFBIN:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Changing the illumination
lamp
To change the Bulb/LED used for
illumination of your refrigerator, call your
AuthorisedService.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose of
this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in
a safe and comfortable way.The lamps
used in this appliance have to withstand
extreme physical conditions such as
temperatures below -20 °C.
(only chest and upright freezer)
Connecting the water hose to
the refrigerator
1. Slip the union (b) onto the water
hose (a).
2. Push the water hose downwards
firmly to slip it onto the water inlet valve
(c).
3. Tighten the union (c) by hand to
secure it onto the water inlet valve.
C
Normally, you are not required to
tighten the union with a tool. However,
you can use a spanner or pliers to
tighten the union if there is a leakage
Connecting the water line to
the water supply
Connect the water line to a water
supply valve. If a valve is not present
or you are not sure, consult a qualified
plumber.
13
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Brfb1052ffbi2

Table des Matières