weinor WeiTronic Combio-868 MA Notice D'utilisation Et De Montage page 48

WeiTronic programming instructions
Commissioning a new light or heating receiver unit
light flashes
bright
The receiver quits programming each time the drive is "stopped"
briefly.
0
light flashes
dim
48
1
1. Turn on power.
2. Press the Learn
button on the
back of the
remote control
unit within
5 minutes.
The light flashes
bright and dim.
Bright is the UP
direction, dim is
the DOWN
direction.
3. Press the UP
button briefly
in the lower
time window.
4. Press the DOWN
button briefly
in the upper
time window.