REBER TURBOGRILL FASHION ECO Notice D'utilisation Et Entretien page 12

The gas cylinders must be used, moved and transported always in a vertical position.
The gas cylinders must always be placed in an easily accessible place in order to quickly close the tap in case of need.
The gas cylinders must never be heated or exposed to direct heat to avoid an increase in internal pressure and bursting of the cylinder itself.
Do not store the gas cylinders in an incorrectly ventilated place.
LPG is a heavier gas than air and can easily saturate an environment in the event of gas leaks; a simple spark can cause it to explode.
IMPORTANCE OF THE MANUAL
The manual is an integral part of the machine. It contains important information on safety and the dangers highlighted with the symbols:
The information contained, will allow you to use the machine in perfect safety conditions and have a result of maximum satisfaction.
WARRANTY
The appliance is set up and guaranteed for use with fuels, spare parts and accessories provided by the manufacturer as indicated in this
manual, the appliance features are not guaranteed in case of use with materials and fuels different from the manufacturer's specifications.
Machines for domestic use: the European guarantee provides 24 months warranty from the date of issue of the receipt.
Machines for professional use: the supplier is obliged to repair or replace all components with manufacturing defects that occur in the first 12 months
from the date of commissioning of the appliance and in any case no later than 18 months from the date of shipment (date of issue of the invoice).
The warranty does not include those components for which normal consumption or deterioration due to heat is expected such as for example a
thermocouple, an electrode and a piezoelectric glow plug; the changes in the appearance of the internal and external walls due to the strong heat
present in the appliance, are to be considered as a normal characteristic of the appliance linked to the frequency and time of use, and are therefore not
subject to warranty.
The customer must report to the supplier, to enjoy the warranty, the defects that occur indicating: the serial number of the machine, the reference to
the date of purchase (invoice or receipt) and must send at his own expense the defective piece for repair and the replacement. With the repair or
replacement of the defective part, the supplier fulfills entirely its warranty obligations. If the repairs are required where the machine is installed, the
costs of labor, travel, stay of the technicians, will be entirely at the expense of the client. Damage due to improper use, lack of maintenance,
tampering, will void the warranty.
Warranty repairs do not include cleaning the machine.
The manufacturer adapts and prepares the appliances for the market in which they are sent, the authorized repairers are therefore able to repair and
service only the equipment that has been prepared and sent to the country of destination directly from the parent company. Any products purchased in
countries other than that of use that need assistance or repair under warranty, must be returned to the seller.
WARNINGS AND NORMS
Read all instructions carefully before using the machine, paying particular attention to the safety and danger symbols.
WARNINGS OF USE
The manufacturer declines all responsibility if the product to which this manual refers is used improperly.
Do not immerged the product in water or other liquids for cleaning.
Do not use the appliance with hands not protected by heat-resistant gloves.
Before carrying out any cleaning or maintenance operation, check that the primary power supply is closed and that the appliance is perfectly cold.
Protect your hands with protective gloves during handling, cleaning and maintenance.
Keep the appliance at a minimum distance of 3 meters from any flammable surface or object.
In the event of blockage of the nozzle, immediately close the primary supply, wait for the appliance to cool down completely and replace the nozzle
as indicated in the paragraph Replacing the supply nozzle
TRANSPORT - HANDLING – STORAGE
The machine is packed in a cardboard box, the product is protected with protective pads.
The packaging must be kept in a dry and dust-free place. When on pallets, move only with transpallets or electric lifts.
UNPACKING
Open the carton, unpack the product carefully and place it on a flat, stable and non-flammable surface.
www.rebersrl.it
REBER srl - Via Valbrina, 11 - 42045 Luzzara(RE)
tel. +39 0522 976153 - fax. +39 0522 976096
– Reg. Imprese Trib.Reggio Emilia n.10.000 – P.Iva 00131370355