Publicité
Les langues disponibles
Les langues disponibles
Always protect the appliance from moisture that may cause damage to the structure, to the burner and prevent the proper operation of the piezoelectric
ignition where present.
Piezoelectric ignition works correctly only in a dry environment, humidity can prevent the spark from forming properly; in the event of a power
failure, immediately release the burner tap ignition button, wait a few minutes to disperse the residual gas and repeat the ignition manually using a
long-spouted gas lighter. Avoid insisting with piezoelectric ignition to avoid create a bubble of unburned gas inside the appliance.
The aforementioned anomaly can also occur if the ignition electrode or the thermocouple have been soiled or accidentally hit during cleaning; in the
event of a power failure, immediately release the burner tap ignition button, wait a few minutes to disperse the residual gas and repeat the ignition
manually using a long-spouted gas lighter. Avoid insisting on a piezoelectric ignition to avoid create a bubble of unburned gas inside the appliance.
The burner consists of three micro-perforated ceramic tiles that can be damaged if hits with hard materials, especially when they are hot; take
extreme care and always avoid touching the ceramic when inserting / removing the grill and while cleaning the appliance.
Pay close attention and avoid touching the thermocouple and / or the piezoelectric ignition electrode (if present) during insertion / extraction of the
grill and during cleaning of the appliance.
Do not use the fat collection tray near the burner, especially if it contains fat foods. The high burner temperature can ignite the grease on the tray.
In the event of faults or malfunctions, contact the manufacturer immediately and, if necessary, have the machine checked by an authorized service
center and / or by qualified and competent personnel.
The use of spare parts or accessories not recommended and / or sold by the manufacturer can cause burns, fires or other damages.
TECHNICAL DATA: 9750 N – 9750 NECO - 9751 N
Infrared Burner
3 plates Burner
Included in the package: n. 1 Degreasing tray - n. 1 stainless steel aisi 304 cooking grill - n. 1 Handle - n. 1 Bypass
hose connection x G30 (29-37mbar) - n. 1 Bypass connection and n. 1 nozzle x G30 (50mbar) - n. 1 bypass connection
Degreasing tray
Stainless steel aisi 304 cooking
Grill
Handle
Accessory for skewers with 4
rods d. 4 x 350 mm
Accessory for Refractory Stone
complete with Stone mm.
150x250
TECHNICAL DATA: 9752 N – 9752 NP
Infrared Burner
2 3 plates Burners
Included in the package: n. 1 Degreasing tray - n. 1 stainless steel aisi 304 cooking grill - n. 2 Handle - n. 1 Bypass
hose connection x G30 (29-37mbar) - n. 1 Bypass connection and n. 1 nozzle x G30 (50mbar) - n. 1 bypass connection
Degreasing tray
Stainless steel aisi 304 cooking
www.rebersrl.it
Type of Gas
G30 (29mbar)
G30 (50mbar)
G20 (20mbar)
G20/G25 (20/25mbar)
G25 (20mbar)
and n. 1 nozzle x G20 (20 / 25mbar)
Accessories available upon request
Cod.
Cod. 1084 AA1
Cod. 1084 A31
Cod.
Cod.
Type of Gas
G30 (29mbar)
G30 (50mbar)
G20 (20mbar)
G20/G25 (20/25mbar)
G25 (20mbar)
and n. 1 nozzle x G20 (20 / 25mbar)
Accessories available upon request
Cod.
Cod. 1084 AD5
REBER srl - Via Valbrina, 11 - 42045 Luzzara(RE)
tel. +39 0522 976153 - fax. +39 0522 976096
– Reg. Imprese Trib.Reggio Emilia n.10.000 – P.Iva 00131370355
Nozzle d.
Power kW.
0,95
3,90
0,83
3,90
1,40
3,90
1,40
3,90
1,40
3,20
Nozzle d.
Power kW.
0,95
7,80
0,83
7,80
1,40
7,80
1,40
7,80
1,40
6,40
Consumption
290 g/h
290 g/h
0,370 mc/h
0,370 mc/h
0,370 mc/h
Consumption
580 g/h
580 g/h
0,740 mc/h
0,740 mc/h
0,740 mc/h
Publicité
