Publicité
Les langues disponibles
Les langues disponibles
Press the
0
Clock button repeatedly until the
5.
symbol flashes.
You can see in the display when the meal will be ready.
Setting the time
Following a power cut or when the oven is used for the first
time, the
symbol and three zeros flash in the display. Set the
0
time. The function selector must be switched off.
Setting the timer.
You can use the timer as a normal kitchen timer. It operates
independently of the oven. The timer has a specific signal. This
informs you when the timer or cooking time has elapsed. You
can also set the timer if the childproof lock is active.
Setting procedure
Press the
timer button.
S
1.
The
S
symbol flashes.
Use the + or - buttons to set the timer time.
2.
Default value for button + = 10 minutes
Default value for button - = 5 minutes
The timer starts after a few seconds. The
display. The time counts down in the display.
The time has elapsed
A signal sounds. Press the
goes out.
Changing the alarm time
Press the
S
timer button. Use the + or - buttons to change the
time.
Delete the setting
Press the
timer button. Press the - button until zeros appear
S
in the display.
42
y
End time
K
PLQ
NJ
symbol is lit in the
S
timer button. The timer display
S
Use the + button to set a later end time.
6.
The setting is adopted after a few seconds.
The display shows the end time until the oven starts
operating.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
Setting procedure
Press the
clock button.
0
1.
12.00 appears and the
Use the + and - buttons to set the time.
2.
After a few seconds, the time is accepted. The
goes out.
Changing from summer to winter time.
Press the
0
clock button twice and use the + or - buttons to
change the time.
The timer and the cooking time run down in synchronisation
The symbols are lit. The timer time counts down in the display.
Check the remaining
cooking time,
x
of day:
Press the
0
clock button repeatedly until the relevant symbol
is displayed.
The requested value appears in the display for several
seconds.
K
PLQ
NJ
0
symbol flashes.
0
0
end time or
y
button
symbol
time
0
Publicité
