JVC RD-F321W Notice D'utilisation page 58

Cleaning agents may damage the CD.
Do not expose the CD to rain, moisture, sand or to excessive heat.
CD/CD-R/CD-RW/MP3 discs
The player can playback CD/CD-R/CD-RW/MP3 discs that have been finalised upon
completion of recording.
The player may fail to playback some discs due to poor recording and wide variation in
quality of the discs.
Inserting a disc
1. Push the right corner of the CD door to open it.
2. Insert a disc on the disc tray with the label side facing up.
3. Close the CD door.
Playing a CD
1. Set the FUNCTION switch to the CD/MP3/USB/AUX position.
The player will scan the contents of the CD. The total number of tracks will then
be displayed.
2. The player will start by pressing
Playback will start from the first track and the display will show the current track
number and the symbol X.
3. Adjust the volume by turning the VOLUME control knob.
4. You can activate the bass boost function by pressing BBS.
The unit will boost the sound output of the bass frequencies.
To deactivate this function, press BBS again.
5. To interrupt playback,
The symbol X and the current track number will flash on the display.
6. To resume playback, press
The symbol X and the current track number
7. To stop playback, press STOP/USB.
The total number of tracks will appear on the display.
Note:
The CD door should only be opened when the CD is in stop mode.
If no disc is loaded into the compartment or the disc is placed upside down, the
display will show "NOd".
Selecting a track
While the CD is playing, repeatedly press
Note: You can also repeatedly press
player is in stop mode. Press
.
.
again.
will
/
/
to select the desired track when the
to play the selected track.
GB-9
stop flashing.
to play the desired track.