Milwaukee HBSE 75 S Instructions D'utilisation page 5

Rip fence, mitre
fence and cross
fence
(Accessory*)
Maintenance
Accessories
4
ENGLISH
All manuals and user guides at all-guides.com
For suction greater quantities of dust, an adaptor can be fitted which enables a
suction hose to be used (available as accessory). This can be connected to an
industrial vacuum cleaner.
When sanding metal the dust suction facility should not be used, because of the
risk of fire from flying sparks.
Screw the fence sideaways on to the
housing (see picture). You can set angle of
o
0–45 .
*Not included in standard equipment,
available as an accessory.
The ventilation slots of the machine must be kept clear at all times.
Use only Milwaukee accessories and spare parts. Should components need to be
exchanged which have not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the ten–digit
No. as well as the machine type printed on the label and order the drawing at your
local service agents or directly at: Atlas Copco Electric Tools GmbH, Postfach 320,
D–71361 Winnenden.
The range of accessories with part numbers is shown in our catalogue.
HBSE 75 S