BEROTEC K TM 690 Manuel D'utilisation page 22

B E R O T E C
5. Connect black/white cable for gear indicator (1)
» Connect cable with branch connector (2) to 6-pin connector (3) (left on frame)
Cable color: connector side harness (male): green/brown (4)
connector side engine (female): white
→
Attention: The cable may only be connected to voltages 0-5V. Higher voltages destroy
the device.
6. Engine temperature sensor Connect plug and screw together (no picture)
7. Stick on display, check cable routing
Application example - mount is not included! Application example - mount is not included!
22
1
4
2
3
CUMPAN
Video