BEROTEC K TM 690 Manuel D'utilisation page 19

Menu 4 [LAYOUT]:
Submenu 4 [LAYOUT] - [gearing calibration]:
Menu 5 [SENS]:
» Damping: Sets the smoothing of the speed
» Sensor: Preset for „BIKE" (24 pulses) / „CAR" (60 pulses) or „UNI" (freely adjustable)
» Count („UNI" only): The number of pulses per crankshaft revolution can be freely selec-
ted and thus the RPM detection can be customized
DISPOSAL
Equipment that can no longer be used should not be disassembled as a whole unit, but
rather in individual parts and recycled according to the type of materials. Components
that cannot be recycled must be disposed of in an appropriate manner.
» Layout: Display layout selectable from 5 different
representations
» gearing calibration: Calling up the gear calibration
» Gear calibration (engine must be running):
• select „Gear 1" and engage 1st gear on motorcycle
• press „calibrate" - selected gear appears green
→ value has been captured
• repeat the above steps for all further gears
(„Gear 2" → 2nd gear on motorcycle etc.)
If necessary, the determined values can be adjusted
manually using the arrow keys.
English
19