Safety And Environment Instructions; Transportation Safety; Electrical Safety; Installation Safety - Beko RFNE448E45W Manuel D'utilisation

Safety and environment instructions

• If there is a lock on the door of the
product, the key should be kept out
of the reach of children.

1.3 Electrical safety

• The product must be unplugged
during installation, maintenance,
cleaning, repairing and moving
procedures.
• If the power cable is damaged, it must
be replaced by a qualified person
specified by the manufacturer,
authorised service agent or importer
in order to avoid potential dangers.
• Do not squeeze the power cable
under or behind the product. Do not
place heavy objects on the power
cable. Power cable must not be bent
excessively, pinched or get in contact
with any heat source.
• Do not use extension cords, multi-
sockets or adapters to operate the
product.
• Portable multi-sockets or portable
power sources can overheat and
cause fire. Therefore, do not keep
any multi-sockets behind or near the
product.
• Plug must be easily accessible. If
this is not possible, the electrical
installation to which the product is
connected must contain a device
(such as a fuse, switch, circuit
breaker, etc.) which conforms to the
electrical regulations and disconnects
all poles from the grid.
• Do not touch the power plug with
wet hands.
• Remove the plug from the socket by
gripping the plug and not the cable.
Refrigerator/User Manual

1.4 Transportation safety

• Product is heavy; do not move it
alone.
• Do not hold its door when moving the
product.
• Pay attention not to damage the
cooling system or the piping during
transportation. If the piping is
damaged, do not operate the product
and call the authorised service agent.

1.5 Installation safety

• Call the authorised service agent
for installation of the product. To
make the product ready for use,
check the information in the user
manual to make sure that the
electricity and water installations
are suitable. If they are not, call a
qualified electrician and plumber to
have the necessary arrangements
made. Otherwise, there is the risk of
electric shock, fire, problems with the
product, or injury!
• Prior to installation, check if the
product has any defects on it. If the
product is damaged, do not have it
installed.
• Place the product on a clean, flat
and solid surface and balance it
with adjustable feet. Otherwise,
the product may tip over and cause
injuries.
• The installation location must be
dry and well ventilated. Do not place
carpets, rugs or similar covers under
the product. Insufficient ventilation
causes the risk of fire!
• Do not cover or block the ventilation
openings. Otherwise, power
consumption increases and your
product may get damaged.
7 / 36 EN