Equinux tizi kraftprotz powerstart Mode D'emploi page 20

All manuals and user guides at all-guides.com
Kraftprotz
Once you plug the cable in, the tizi Kraftprotz automatically
turns on. This port is ideal for iPhones, other cell phones, Tabs
and most other USB devices (max. 1A).
Micro USB input
Use this port to recharge your tizi Kraftprotz. All LEDs will
remain lit as soon as your tizi Kraftprotz is fully charged. De-
pending on which charging device is used, this will take anyw-
here from eight to ten hours.
Status LEDs
After plugging in the USB charging cable or quickly pushing
the status button
current battery status of your tizi Kraftprotz.
Jumper cable port input
Port for the jumper cable to boost your car's battery.
Status button
A short push on the status button will activate the Status LEDs
.
Flashlight
The flashlight can be turned on and off by a longer push on the
status button
EN
POWERSTART
, the four blue LEDs will display the
.
20
EN
EN