Radio; Receiving Preset Stations; Best Stations Memory (Bsm) - Pioneer MVH-280DAB Mode D'emploi

NOTE
Press and hold / then release to seek an available service. Scanning stops when the unit
receives a service.
To select service component from service lists
1
During DAB reception, press .
Displays the list of all service components. Press
component alphabetically.
2
Select a service component from the list you selected, then press the M.C. dial to
confirm.
NOTE
You can update the service list by pressing and holding
Presetting service components
To store service components
1
While receiving the service component you want to store, press and hold one of
the number buttons (1/ to 6/
To receive stored service components
1
Select the band, then press a number button (1/

Radio

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.

Receiving preset stations

1
Press SRC/OFF to select [RADIO].
2
Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
3
Press a number button (1/ to 6/
again to search for a service
. To cancel updating, press again.
) until it stops flashing.
to 6/ ).
).
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 9).

Best stations memory (BSM)

The six strongest stations are stored on the number buttons (1/
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press
Press and hold / then release to seek an available station. Scanning stops
when the unit receives a station. To cancel seek tuning, press
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 9).
To store stations manually
1
While receiving the station you want to store, press and hold one of the number
buttons (1/ to 6/ ) until it stops flashing.
Using PTY functions
The unit searches for a station by PTY (program type) information.
1
Press during FM reception.
2
Turn the M.C. dial to select a program type from [NEWS/INFO], [POPULAR],
[CLASSICS] or [OTHERS].
3
Press the M.C. dial.
The unit begins to search for a station. When it is found, its program service name is
displayed.
NOTES
• To cancel the search, press the M.C. dial.
• The program of some stations may differ from that indicated by the transmitted PTY.
• If no station is broadcasting the type of program you searched for, [NOT FOUND] is displayed for
about two seconds and then the tuner returns to the original station.
to 6/ ).
/ to select a station.
/ .
5
En