Publicité
Les langues disponibles
Les langues disponibles
Burgundy
3.4. Maintenance
3.4.1. Care of the stove
Do not use abrasive cleaners, use a dry lint-free cloth
or a soft bristle brush.
3.4.2. Cleaning the glass
Any deposits on the glass should clear when the stove
is fired high. If there is any soot or tar left, first
until the glass is
cool, clean with a proprietory stove
glass cleaner.
Do not use abrasives cleaners.
The glass will resist temperature up to 750°C. Do not
replace broken-glass with substitute materials. Consult
your usual FRANCO-BELGE supplier.
3.4.3. Flue cleaning and summer time
The chimney and the connecting flue pipe must be
swept a least once a year. Also remove any deposits
from the oscillating grates, the firebox surfaces and the
flue collar. Keep the air inlet door free from ashes.
If left unused for long periods (E.g. summer months)
clean the appliance thoroughly and block the chimney,
leave all air inlets fully open.
3.5. Removing the oscillating grates
Figure 10
- De-ash and ash-dump the grates.
- Open the loading door and remove the fuel retainers.
- Remove the side firebricks .
- Remove the flue baffle and the rear firebrick.
- Lift up the left part of the oscillating grate, push it to
the left and when the right part of the grate is free, tip it
up completely.
In case of exchanging old grates by new ones, operate
one grate by one grate to make sure you keep the
riddling device to the right place. After the exchange,
check if riddling can be done easily without jamming.
22
Poêle mixte
do wait
A : Firebricks
B : Riddling control
C : Riddling device
D : Oscillating grate
Document n° 729-4EN ~ 03/02/1999
A
A
D
C
C
D
Figure 10 - Removing the grates
Réf. 124 13 04
B
B
Notice de référence
Publicité
