Publicité
Les langues disponibles
Les langues disponibles
Burgundy
2. Installation instructions
1
a
c
2
b
c
Figure 3 - Smoke exit
1 - Smoke exit at rear
2 - Smoke exit on the top
a : Blanking plate
b : Flue collar
18
Poêle mixte
d
e
b
d
a
c : Clamp
d : Airtight seal
e : Fire cement
Document n° 729-4EN ~ 03/02/1999
2.1. Assembly of the flue collar and the
blanking plates
Figure 3
The flue collar and the 2 blanking plates are assembling
deliver on the stove, smoke exit at rear.
For installation smoke exit on the top :
- Remove the rear heat shield,
- Remove the flue baffle and the firebricks,
- Exchange the blanking plates with the flue collar,
ensuring that it is leaktight,
- Replace the firebricks and the flue baffle,
- Replace the rear heat shield and close the exit position
with an iron plate.
2.2. Mounting the tray
Figure 4
To avoid damage during transport, the tray has been
stored behind the main door.
- Fixed the tray, of the appliance. Center on tab "A" and
lower into place.
Figure 4 - Mounting the tray
2.3. Fitting of the handle
Figure 5
In order to avoid the damaging of the threading, first put
the handle in operating position then screw it into the
taping of the lock.
Figure 5 - Fitting of the handle
Réf. 124 13 04
A
Notice de référence
Publicité
