Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
LAMINATOR CONTROLS
A
On / off switch
B
Ready LED
C
Release lever (
CAPABILITIES
Performance
Format
Entry width
Pouch thickness
Warm up time (estimate)
Cool down time
Lamination speed
(+/- 5%)
Number of rollers
Ready indication
Release lever
Clear Path / Anti-jam engine Yes
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power
cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before
final laminations.
DO remove staples and other metal articles prior to
laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended
period.
DO use pouches designed for use at the appropriate
settings.
DO keep away from pets, while in use.
4
407534C M1-95.indd 4
E
)
9.5" / 240mm
A4 = 240mm
3 mil (per side)
3 minutes
60-90 minutes
approx. 12"/min
(fixed speed)
2
Light
Yes
D
Pouch / document entry slot
E
Pouch / document exit
F
Power on LED
Technical Data
Voltage / Frequency /
Current(Amps)
Wattage
Dimensions (HxWxD)
Net weight
Max document thickness
(laminating capacity)
DO NOT leave the power cord in contact with hot
surfaces.
DO NOT leave power cord hanging from cupboards or
shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the
machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult
supervision.
DO NOT laminate sharp or metal objects (eg: staples,
paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets,
ultrasounds etc) on hot settings.
DO NOT laminate with self-adhesive pouches on hot
settings.
DO NOT laminate an empty pouch.
110-120V AC, 60Hz, 2.5A
300 Watts
1.75" x 8.25" x 13.5"
3lb
.040" / 1 mm
4/23/13 1:12 PM
Publicité
