Publicité
Les langues disponibles
Les langues disponibles
4.
Adjust the temperature between 61ºF and 86ºF (16ºC and
30ºC).
NOTE: In Fan mode, the temperature cannot be set.
5.
Wait 3 seconds before turning off the air conditioner.
6.
Press TIMER. Timer On indicator light on the air conditioner
control panel will flash. Display will show remaining hours
before the air conditioner will turn on.
7.
Press the TEMP/TIME up or down arrow button to change
the delay time from 1 hour to 24 hours.
8.
Timer On indicator light on the air conditioner control panel
will remain on.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1.
Press TIMER once after it has been programmed. Display on
the air conditioner control panel will show remaining time.
2.
While the display is showing the remaining time, press
TIMER untill Timer indicator light turns off.
To see or change the remaining time (in hours):
1.
Press TIMER once after it has been programmed. Display on
the air conditioner control panel will show remaining time.
2.
While the display is showing the remaining time, press
the TEMP/TIME up or down arrow button to increase or
decrease the time.
3.
After 5 seconds, the display on the air conditioner control
panel will show the current room temperature.
12
Changing Air Direction
Use the tab to direct the airflow right or left.
Normal Sounds
When your air conditioner is operating normally, you may hear
sounds such as:
Droplets of water hitting the condenser, causing a pinging or
■
clicking sound. The water droplets help cool the condenser.
Air movement from the fan.
■
Clicks from the thermostat cycle.
■
Vibrations or noise due to poor wall or window construction.
■
A high-pitched hum or pulsating noise caused by the modern
■
high-efficiency compressor cycling on and off.
A
A. Tab
Publicité
