Specifications; Functional Description - Haussmann PNT240-PN Manuel De L'utilisateur

B
H
D
E
IMPORTANT SAFETY INSTRUCTIONS
Use only a pressure-regulated compressed air source to limit the air pressure

supplied to the tool. The regulated pressure must not exceed 110 PSI. If the
regulator fails, the pressure delivered to the tool must not exceed 120 PSI. The
tool could explode which will cause death or serious personal injury.
Always disconnect air resource:

a) Before making adjustments.
b) When servicing the tool.
c) When clearing a jam.
d) When tool is not in use.
e) When moving to a different work area, as accidental actuation may occur,
causing injury.
Never connect to an air source that is capable of exceeding 180 PSI. Over

pressurizing the tool is able to result in bursting, abnormal operation, breakage
of the tool or serious injury to persons. Use only clean, dry, regulated
compressed air at the rated pressure or within the rated pressure range as
marked on the tool. Always verify prior to using the tool that the air source has
been adjusted to the rated air pressure or within the rated air-pressure range.

SPECIFICATIONS

The HAUSSMANN nailer shoots most standard air staples as well as 18 gauge
brad nails. It can be used for cabinet making and furniture assembly, door and
window casing manufacturing, aluminum and vinyl siding installation, soffit work,
trim and moulding application, picture framing and applications where gluing is
necessary, but clamping is impractical.
Shoots all sizes of industry standard 18 gauge narrow crown staples (90 series

1/4" crown), 5/8'' to 1-5/8'' (16 to 40 mm) in length.
Shoots industry standard 18 gauge brad nails in the following sizes: 5/8" (16 mm)

3/4" (20 mm), 1" (25 mm), 1-3/16" (30 mm), 1-1/4" (32 mm), 1-5/8"(40 mm), 1-3/4"
(45 mm) and 2" (50 mm).
Operating pressure: 60-100 PSI

Air consumption: 4.6 CFM @ 90 PSI

Air inlet: 1/4" NPT

Rubber grip


FUNCTIONAL DESCRIPTION

Figure 1 names the major components of the
HAUSSMANN 2-in-1 nailer:
A
A. Deflector
B. Body
C. Quick release
D. Magazine
E. Fixed latch
F. Air plug
F
G. Depth control valve
H. Trigger
G
C
Fig.1
19