Publicité
Les langues disponibles
Les langues disponibles
Section
03
Available accessories
For details concerning operation, refer to the
Bluetooth adapter's operation manual. This
section provides brief information on Blue-
tooth audio player operations with this unit
which slightly differes or is cut short from that
described in the Bluetooth adapter's operation
manual.
! Even though your audio player does not
contain a Bluetooth module, you can still
control it from this unit via Bluetooth wire-
less technology. To control your audio
player by using this unit, connect a product
featuring Bluetooth wireless technology
(available on the market) to your audio
player and connect Bluetooth adapter (e.g.
CD-BTB100) to this unit.
1 Device name
Shows the device name of the connected
Bluetooth audio player (or Bluetooth adapter).
1
Press SOURCE to select Bluetooth audio
player.
# If you cannot display BT Audio, first activate
the BT audio source in the initial setting. For de-
tailes, refer to Activating the BT Audio source on
page 32.
# For this unit to control your Bluetooth audio
player it needs to establish a Bluetooth wireless
connection. (Refer to Connecting a Bluetooth
audio player on this page.)
2
To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
3
To skip back or forward to another
track, push MULTI-CONTROL left or right.
44
En
1 1 1 1
Introduction of advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears in the display.
3
Turn MULTI-CONTROL to select the
function.
Turn MULTI-CONTROL to switch between the
functions in the following order:
Connection open (connection open)—
Disconnect audio (disconnect audio)—Play
(Play)—Stop (Stop)—Pause (pause)—
Device info (device information)
# If a Bluetooth audio player is connected via
lower level, only Disconnect audio and
Device info appear in the function menu.
# If a Bluetooth audio player has not been con-
nected to this unit yet, Connection open and
Device info appear in the function menu and
other functions are not available.
# You can also select the function by pressing
FUNCTION on the remote control.
# To return to the playback display, press BAND.
# If you do not operate functions except for
Connection open and Disconnect audio within
about 30 seconds, the display is automatically re-
turned to the ordinary display.
Connecting a Bluetooth audio
player
1
Use MULTI-CONTROL to select
Connection open in the function menu.
Publicité
