Kalkhoff IMPULSE EVO RS Notice Originale page 163

6.4.3.10 Impulse Evo Smart Compact display: Time
Path: Settings | Device settings | Display | Time
The time is shown in the start menu. Proceed as follows to set or change
the time:
1. Navigate to "Time" as described in  6.4.1
Configuring settings in the main menu Page
EN-51.
2. Use the / buttons to select the digits
required. The selection is highlighted
white.
3. Confirm by briefly pressing . You move to
the next option.
4. Confirming the seconds with returns you
to sub-level 2.
6.4.3.11 Impulse Evo (Smart) display: Parking light
Path: Settings | Device settings | Display | Parking light
From this menu, you can set how long the parking light of the pedelec
stays on after the system switches off.
1.
Navigate to "Parking light" as described in  6.4.1 Configuring
settings in the main menu Page
You can choose between:
OFF 15 secs. 30 secs. 45 secs
Time
0 9:5 2 :07
Setting the time
EN-51.
60 secs
2. Use the / buttons to select the desired option. The selection is
highlighted.
3. Confirm by briefly pressing . You return to sub-level 1.
6.4.3.12 Impulse Evo (Smart) display: Navigation
indicator sound
Path: Settings | Device settings | Display | Navigation indicator sound
Proceed as follows if you want to be made aware of turns by an audible
sound:
1. Navigate to "Navigation indicator sound" as described in  6.4.1
Configuring settings in the main menu Page
You can choose between:
Normal Quiet Quiet, short
2. Use the / buttons to select the desired option. The selection is
highlighted. An audible sound is emitted at the same time - which
makes you aware of turns in the future too.
3. Confirming the audible sound with returns you to sub-level 2.
Original User Guide | Pedelec Impulse Evo RS Version 2
EN-51.
Off
EN-61