Kalkhoff IMPULSE EVO RS Notice Originale page 150

Symbol Battery charge level
100 – 75 %
74 – 50%
49 – 25 %
24 – 10 %
0%
6.3.4 Changing assist mode
1. You must be in the start menu to change the assist mode. Select the
assist level you require by briefly pressing the / buttons.
Display Assist
ULTRA *
Assist function is working with
maximum power
POWER
Assist function is working hard
SPORT
Assist is working with medium power
ECO
Assist is working with low power
OFF
No assist
2. Assist starts working as soon as you start pedalling. Assist cuts out
as soon as you stop pedalling or when you have reached a speed of
25 km/h.
EN-48 Original User Guide | Pedelec Impulse Evo RS Version 2
Impulse Evo (Smart) display
Underneath the assist level selected is a display area showing the current
assist level from the drive unit in the form of ten bars having increasing
heights. The more bars are dark, the higher the assist level being provided.
140 km 00:02 140
This display is only shown when an assist mode is selected.
0 0
The drive unit is not assisting
.0
km/h
6.3.5
Trip Zeit Trip Zeit
Push assist helps you when pushing the bike.
00.00.00 00.00.00 0.00 km
WARNING
Power consumption
Push assist may only be used when pushing the pedelec. Otherwise
Very high you could seriously injure yourself. Push assist is not designed to
provide assistance when someone is sitting on the pedelec. On back
High
pedal models, the pedal crank also turns.
Medium
Low
Very low
140 km 00:02
ECO
SPORT
km 00:02
140 km
0
The drive unit is providing
.0 medium assist
km/h
Enabling push assist
Trip Trip
Trip Zeit
0.00 km
00.00.00
Push assist helps you when pushing the bike (up to max.
6 km/h). This is particularly helpful when you want to push
your pedelec uphill.
140 km
POWER
POWER
00:02
The drive unit is providing
maximum assist
.0
km/h
Trip
0.00 km
SPORT
00:02