Kalkhoff IMPULSE EVO RS Notice Originale page 148

1
2
3
4
Easy-reach control
No. Symbol Function
1 a) On  6.3.1 Switching on the pedelec Page EN-46
b) Off  6.3.2 Switching off the pedelec Page EN-47
2 a) Increase value / scroll up
b) Push assist  6.3.5 Enabling push assist Page EN-48
c) Enable display light
3 a) Decrease value / scroll down
b) Enable display light
4 a) Configure/confirm
b) In the main menu, switch between the favourite settings
 6.3.6 Favourite settings Page
c) Enable display light
EN-46 Original User Guide | Pedelec Impulse Evo RS Version 2
EN-49.
6.3.1 Switching on the pedelec
The system can only be activated if a sufficiently charged
battery has been inserted.
Do not switch on the pedelec when you are riding.
Otherwise the motor can stop and you will not be provided
with the full assist level.
1. Press the button on the easy-reach control for one second. The
display light turns on. On the Impulse Evo (Smart) display, the display
light goes out after about 30 seconds. The cycle light also switches on.
A welcome message appears in the information field of the display. If
you have an Impulse Evo RS system with back pedal, "Please pedal" is
shown. You can configure other settings from the start menu.
ECO
140 km 00:02
0
.0
km/h
Trip time Trip
00.00.00 0.00 km
Impulse Evo (Smart) display: Impulse Evo Smart Compact display:
Start menu Start menu
140 km 00:02 POWER
0
.0
km/h
Trip time Trip
00.00.00 0.00 km
SPORT
140 km 00:02
11:18
OFF 140km
0.0
km/h
Trip 0.0 km