Cleaning And Maintenance; Cleaning The Measuring Cell; Cleaning The Housing - Mettler Toledo Refracto 30PX Mode D'emploi

10

Cleaning and maintenance

10.1

Cleaning the measuring cell

Remains of the sample on the prism reduce the accuracy of the
Refracto measurements. The Refracto therefore must be cleaned carefully after
each measurement.
- Rinse and dry the end of the instrument after dip-in measurements.
- Clean the measuring cell with a cleaning tissue to remove remains of the
sample completely.
- Never use aggressive liquids or solvents to clean the housing of the Refracto.
- Be careful never to scratch the surface of the prism when cleaning it !
- We recommend that you use the cleaning tissues which come with the instru-
ment.
10.2

Cleaning the housing

- Never use aggressive liquids or solvents to clean the housing of the Refracto.
- We recommend that you use the cleaning tissues which come with the
instrument.
METTLER TOLEDO Refracto 30PX/GS
Cleaning and maintenance
19