Publicité
Les langues disponibles
Les langues disponibles
• Remove the main filter (13).
• Brush any loose dust off the filter (12).
• To remove the pre-filter, rotate the pre-filter
counterclockwise and carefully slide it clear
of the dust container.
• The dust container can be cleaned.
Wipe with a damp cloth or rinse with
warm soapy water and allow to dry.
• The filters are re-usable and should be
cleaned regularly. Rinse with warm
soapy water and allow to dry.
• Install the pre- filter into the dust
container (11) rotating it clockwise until it
locks into place.
• Install the main filter into the
pre-filter.
• Install the dust container (11) to the
appliance, rotate it clockwise until it locks
into place.
WARNING:
Respiratory Hazard: Never use the
appliance without the filters. Optimum dust
collection will only be achieved with clean filters.
CAUTION:
appliance on when dust container is removed.
Replacing the filters
The filters should be replaced every
6 to 9 months and whenever worn or
damaged. Replacement filters are available
from your BLACk+DECkER dealer (cat.
no. PVF110):
• Remove the old filters as described
above.
• Fit the new filters as described above.
I
Projectile/
Do not turn
6
G
H
J
Publicité
